1.63~3150A Load isolation transfer switch
1.The load isolation switch of 63~3150A is suitable for the changeover of two setsof low voltage electric circuit or the changeover of 2 sets of on-load devices or safetyinsulation.
2.Operation mode:Direct operation: handle is installed on the switch.Operation outside the board: handle is installed outside the door of power distributingboard.
3.Products with observation windows can be provided according to the demand toobserve directly the on and off state of contact.
4.Products with observation windows can be provided according to the demand to
observe directly the on and off state of contact.
5.The products have three poles, four poles, and (three poles switch neural pole).
6.Extended shaft is used for the operation outside the board.
7.Two sets of auxiliary contacts can be assembled according to the demand.
8.Mechanical property and electric property correspond to the mechanical property
and electric property of 63~3150A.
9.A bridge can provided to connect the inlet or outlet terminal of the switch.
Note: The bridge connection is chosen, an explanation is needed to indicate the inletor outlet is connected with it.
2.Overall and installation dimension of 63~1600Aoad isolation transfer switch
2.Overall and installation dimension of 63~1600Aoad isolation transfer switch
